You can find our standard Window Well sizes by clicking here.

Yes! For small orders a variety of widths and projections are available in the following heights: 12″, 22″, 30″, 36″ and 42″, with short lead times. For large orders any combination of width, projection and height can be produced to meet your project needs. Contact your local distributor for a quotation on the size you require.

If either the width is less than 20″ or the projection is less than 8″, the window well will need to be made with square corners instead of normal round corners.

The maximum height possible in a single piece is 42″. For requirements greater than 42″ in height, multiple pieces will be joined.

For long spans that are subject to heavy back fill, extra enforcement may be required.

Please be sure to advise us of any special requirements for your project.

When possible we recommend removing and replacing old window wells. If you or your water proofing contractor determine that this can not be done, it is possible to extend your current window well by purchasing a similar sized unit to wrap around the older unit to increase the height. However, we can not guarantee a perfect fit between older and newer window wells.

We highly recommend that your secure your window well by anchoring to the foundation. Over time without proper anchoring your window well can shift due to seasonal frost heave. This is not only unsightly but can compromise your basements waterproofing around windows.

Here’s an example of a window well after 10 years that was not correctly anchored:

Yes, you can find them by clicking here.

Egress window wells are required when a basement window is a secondary means of escape from a bedroom in order to comply with Egress Codes. Having a correctly sized window well is an important part of meeting egress requirements and providing a safe method of escape from basements.

Yes, you can find them by clicking here.